电子文章 | 电子资料下载 | 家电维修 | 维修资料下载 | 加入收藏 | 全站地图
您现在所在位置:电子爱好者维修技术电脑技术硬件维修其它硬件电脑各种中英文信息对照及错误信息总汇

电脑各种中英文信息对照及错误信息总汇

09-07 21:49:07 | http://www.5idzw.com | 其它硬件 | 人气:183
标签:其它硬件维修,http://www.5idzw.com 电脑各种中英文信息对照及错误信息总汇,http://www.5idzw.com
Cannot create a zero size partition     不能建立大小空间为0的分区   
Unable to access Drive X     不能访问驱动器X   
Cannot delete Primary DOS Partition on drive 1 when an Extended DOS Partition exists     当扩展分区存在时不能删除硬盘1上的主DOS分区   
Invalid entry     无效的输入   
Volume label does not match     标不匹配,当你删除分区时,系统会提示输入该分区的卷标,如果输入的巻标和你要删除的分区的卷标不一致时,操作将不能进行   
Cannot create Logical DOS Drive without an Extended DOS Partition on the current drive     没有扩展分区时不能在当前硬盘上建立逻辑驱动器   
Could not change partitions, because the disk could not be locked   不能改变分区,因为该硬盘不能被锁定   
Internal error   内部错误   
Incorrect MS-DOS version   不正确的MS-DOS版本   
Invalid parameter   无效的参数   
Cannot FDISK with network loaded   不能对网络驱动器进行FDISK   
The master boot code has NOT been updated
/STATUS Displays partition information   主引导区代码没有被更新。显示分区信息   
/X Ignores extended disk-access support. Use this switch   不使用扩展磁盘访问指令支持。当你使用   
if you receive disk access or stack overflow messages   这个参数时你将看到堆栈溢出的信息   
/MBR and /CMBR cannot both be specified     /MBR和/CMBR这两个参数不能同时使用   
/MBR only operates on drive 1,use /CMBR for other drives   只能对硬盘1使用,/CMBR对其他硬盘使用/MBR   
You must specify a drive number with /CMBR
Invalid partition table     在使用/CMBR参数时必须说明硬盘的序号。无效的硬盘分区表   
Error loading operating system   在装入操作系统时错误   
Missing operating system   操作系统文件丢失   
stack overflow   堆栈溢出   
integer divide by 0   整数被0除   
run-time error   运行错误   
not enough space for environment   没有足够的空间

www.5idzw.com

十、MS-DOS信息

提示信息         说明   
Abort edit(Y/N) 中断编辑吗(Y/N)?
Abort,Retry,Ignore,Fail?   终止,再试,忽略错误状态,失败?
Access denied 拒绝访问
All files canceled by operator 所有文件被操作员取消
All logical drives deleted in dxtend DOS parition 扩展DOS分区中的所有逻辑驱动器被删除
Allocation error less than size adjusted   文件分配出错,调整长度
Attempted to write protect violation 试图违反写保护

提示信息                       说明                 
Backing up files to target drive x 把文件备份到目标驱动器X中
Back up file sequence error 备份文件顺序错误
Bad call format 错误的调用格式
Bad command or filename 错误的命令或文件名
Batch file missing   批处理文件丢失
Break is On/Off 中断是开还是关
Buffer size adjusted   调整缓冲区长度
Bad or missing (filename) 错误的或丢失了文件名
bad partition table   分区表坏
Bad tracks found at start of partition 在分区开始发现坏磁道

提示信息               说明                 
Cannot CHDIR to root   不能改变到根目录
Cannot create extended DOS partition with out primary DOS partition onDisk 在盘中没有主DOS分区,故不能建立扩展分区
Cannot delete extended DOSpartition While logical drive excise 当逻辑驱动器存在时,不能删除扩展DOS分区
Cannot Edit.BAK file,Rename file 不能编辑.BAK文件,改名文件
Cannot exec formAY 不能执行formAT命令
Cannot exec XCOPY 不能执行XCOPY命令
Cannot find object file 找不到目标文件
Cannot find livrary file 找不到库文件
Cannot find system file 找不到系统文件
Cannot load command,system haled 不能装入命令,系统暂停
Cannot open reponse filename 不能打开响应文件
Cannot open rum file 不能打开运行文件
Cannot open temporary file 不能打开临时文件
Cannot start COMMAND,exiting 不能启动COMMAND,退出
Cannot XCOPY from a reserved 不能从保留设备进行XCOPY命令
Change diskette and press 更换软盘后按键
Commpare error(s)on track xx, side yy yy面xx磁道比较出错
Compare more diskette(Y/N)? 要比较更多的磁盘吗(Y/N)?
Compare more file(Y/N)? 比较其它的文件吗(Y/N)?   
Convert llost chains to file(Y/N)? 把丢失的链转换成文件吗(Y/N)?
Copu another(Y/N)? 还要拷贝吗(Y/N)?
Copy complete 拷贝完成
Copying xxx tracks 正在拷贝XXX磁道

提示信息           说明                 
d:drive deleted   d:驱动器被删除
data record too large 数据记录太大
Delete current volume label(Y/N)? 删除当前卷标吗(Y/N)?
Device error during prepare 设备状态错误
Device error during select 选择期间设备错误
Device or code page missing from font file 字库文件中的设备或代码页丢失
Directory is totally empty 目录完全空
Disk boot failure 磁盘自举失败
Disk error reading drive x 读驱动器X时,磁盘错误
Disk error reading FAT x 读文件分配表X时,磁盘错误   
Disk error writing drive x   写驱动器X时,磁盘错误
Disk error writing FAT x 写文件分配表X时,磁盘错误
Disk full Edit lost 磁盘空间满,编辑丢失
Disk not compatible 磁盘不兼容
Disk umsuitable for system disk 不适于做系统盘
Diskette/drive not compatible 磁盘/驱动器不兼容
Diskette compare OK 磁盘比较通过
Do you wish to use the maximum size for a DOS partition and make theDOS partition active(Y/N)?   希望将最大容量用于一个DOS分区并激活这个DOS分区吗(Y/N)?
DOS partition already exist DOS分区已经存在
Drive d:already deleted   磁盘d:已删除
Drive letter must be specified 必须指定驱动器字符
Drive not ready error 驱动器未准备而出错
Drive types (Double,Single side) or diskette types not compatible 驱动器类型 双面,单面 或软盘类型为兼容
Duplicate filename or file not found 重名或文件未找到

提示信息                                           说明                 

上一页  [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13]  下一页

,电脑各种中英文信息对照及错误信息总汇
关于《电脑各种中英文信息对照及错误信息总汇》的更多文章